-
Who this checklist is for
-
Step 1: Write the cut profile before you look at any machine
-
Step 2: Measure your power supply before you measure anything else
-
Step 3: Decide manual or CNC, and be honest about volume
-
Step 4: Ask for a sample cut on your material
-
Step 5: Get the consumable list and pricing in writing
-
Step 6: Verify certification by number, not by photo
-
Step 7: Nail down the service and spares channel
-
Things that trip people up (including me)
Who this checklist is for
This is for the shop buying one plasma cutting machine—maybe two—and wanting to get it right the first time. Not a fleet buyer, not someone replacing a full line. A small operation, a first CNC upgrade, or a fabricator adding capacity without adding headcount.
I'm the quality and compliance manager at a metal fabrication company. I review every machine and upgrade package before it hits our floor—roughly 40 units and kits a year. In 2024, I rejected about 12% of first deliveries for spec mismatches that should have been caught at the quoting stage.
Here's the thing: small orders get pushed to the back of the queue at more than one supplier. The quote takes a week. The sample never ships. The rep keeps "checking with the factory." Frustrating doesn't cover it. But the buyers who don't get pushed around aren't the big accounts—they're the ones who show up with a written spec and a process. This checklist is that process. Seven steps, in order, and none of them require you to be a large customer.
Have your material list, your power specs, and a realistic budget range on paper before you start. The rest you collect as you go.
Step 1: Write the cut profile before you look at any machine
"We need a plasma cutter" is not a spec. Your supplier cannot quote accurately against it, and you cannot compare two quotes built on different assumptions.
Write down:
- Material type (mild steel, stainless, aluminum) and grade
- Thickness range in mm—the minimum and the maximum, not the average
- Required edge quality, expressed as a class. ISO 9013:2017 is the standard most manufacturers quote against, and it defines cut quality classes from widest to tightest tolerance. Ask your engineer which class the part actually needs; structural work is usually fine at the wide end, precision brackets are not.
- Longest single cut, and total cut length per shift
This is the step people skip. They describe what they cut today and forget the 25mm plate job that comes around twice a year. Then that job shows up, the machine tops out at 20mm, and someone spends a week on the phone.
Step 2: Measure your power supply before you measure anything else
Most plasma cutting machines in the 45-105 amp range want three-phase power at 380-480V. Some entry models run on single phase, but duty cycle and thickness capacity drop offline fast. Call an electrician, get the actual available amperage at the panel, and note voltage and phase.
Real talk: I nearly ordered a 105-amp unit on a single-phase service. The quote looked fine, the spec sheet said "45-105A," and I read what I wanted to read. What finally helped was having the electrician on the phone while I re-read the fine print. It probably saved us a service upgrade and a month of downtime. Now it's the first number I check on any industrial plasma cutting machine quote.
Also budget for compressed air. Clean, dry air at the right cfm is not optional for modern torches, and the dryer and separator are line items that never make the first quote.
Step 3: Decide manual or CNC, and be honest about volume
I went back and forth between a hand-held setup and a CNC table for about three weeks. The manual option was cheaper up front and easier to justify. The CNC plasma cutting machine was roughly three times the price but would let us cut brackets without a layout guy standing there.
What tipped it: I counted our actual bracket runs for the previous six months. We were cutting the same twelve shapes 80% of the time. Programming those twelve shapes into a CNC table once would pay back in roughly 14 months at our volume. If those runs had been different every time, I would probably have stayed manual.
Do the count. Not the forecast—the actual job history. If more than 70% of your cutting is repeat geometry, CNC is likely the right call. If it's one-off or field work, a good hand-held machine with a quality torch is probably the better investment.
Step 4: Ask for a sample cut on your material
Not on theirs. Not a video. A physical sample, cut on the same grade and thickness you'll be cutting, shipped to you.
The most frustrating part of machine sourcing: the sample you get is beautiful, and the production machine cuts differently. You'd think the sample represents the machine, but it represents the demo bay. What finally helped was writing into the PO that the delivered machine must reproduce the sample cut quality within a stated tolerance, on our material, or we get to reject it.
Ask the supplier to mark the sample with the amperage, cut speed, torch height, and gas settings used. If they can't or won't, that tells you something before the deposit goes out.
Step 5: Get the consumable list and pricing in writing
The CNC plasma cutting machine price is the number on the quote. The number that matters is that price plus consumables for two years.
Request:
- Every consumable part number (electrode, nozzle, shield, swirl ring)
- Expected life per part in arc-on hours, on your thickness range
- Current pricing per piece, with a date
- Whether consumables are proprietary to that torch or cross-compatible
A proprietary consumable stack isn't automatically a problem—sometimes that's how the cut quality is achieved. But you need to know it before you buy, because it locks you into one source. In my opinion, if a plasma cutting machine manufacturer won't disclose consumable pricing in writing, that's a red flag, not a sales tactic.
Step 6: Verify certification by number, not by photo
A sticker on the side of the machine is not certification. A photo of a certificate is not certification either. Ask for the certificate number, the issuing body, and the standard it was issued against.
The ones that matter in most markets:
- CE marking with the applicable directive. The machinery directive is currently 2006/42/EC; the replacement Machinery Regulation 2023/1230 applies from January 2027, so confirm which your supplier is actually compliant with.
- For US installation, whether the unit is listed to the relevant UL/CSA standard for arc welding and plasma equipment (the UL 60974-1 family is the usual reference).
- ISO 9001 on the manufacturing side, if you're buying direct.
Verify the number against the issuing body's public database. That takes ten minutes. Then verify current requirements with your local authority, because directives and enforcement change.
This is where brand compliance gets tricky for small buyers. You're not asking because you doubt the supplier. You're asking because a certificate number you can't verify is a piece of paper, and your insurance carrier will treat it that way after an incident.
Step 7: Nail down the service and spares channel
Who actually fixes the machine when the torch won't fire? Not who sells it. Who fixes it.
Ask, in writing:
- Is there a service technician in your region, and what's the typical response time?
- What's the warranty period, and does it cover the torch, the power supply, and the CNC controller—listed separately?
- Are spare boards and motors stocked locally or shipped from the factory? What's the typical lead time on a control board?
- Is operator training included, and is it on-site or remote?
If any of these answer with "we'll figure it out" or "our partner handles that," get the partner's name and number, and call them. During our 2022 supplier audit we found a distributor reselling machines with no service agreement in place—the end customer waited five weeks on a control board. That's the outcome you're trying to avoid.
Things that trip people up (including me)
- Buying on total price alone. The lowest quote is often missing consumables, air treatment, installation, and training. Compare first-year total cost, not the machine price.
- Ignoring floor and rigging. A 4x8 CNC table with a water bed is heavy. Check your floor loading and get a rigging quote before delivery day, not after.
- "Industry standard" as a spec. When a supplier says something is "within industry standard," ask which standard and which class. If they can't name it, it's not a standard, it's a shrug.
- Skipping the sample on your material. Covered above, but it's the most common skip and the most expensive one.
- Not budgeting the first 90 days of consumables. You will burn through more nozzles in the learning phase than at steady state. Plan for it.
None of these steps require a big order. A one-machine purchase gets the same seven-step treatment as a ten-machine order, and the suppliers who respect that are the ones worth keeping. If you're going through a sourcing partner, ask them to show you all seven answers. A good sourcing partner will already have them on file; anyone who can't answer Step 4 or Step 6 is worth a second look.