-
When to use this checklist
-
Step 1: Lock the actual requirement before you request quotes
-
Step 2: Verify power and facility match
-
Step 3: Check the manufacturer, not just the quote
-
Step 4: Compare total cost, not the sticker price
-
Step 5: Write delivery terms into the contract
-
Step 6: Require a recorded trial cut
-
Step 7: Confirm spare parts and warranty enforcement
-
Common mistakes (and how to avoid them)
When to use this checklist
Use this if you're sourcing an industrial plasma cutting machine and the deadline isn't negotiable — usually because a machine on your shop floor just died, a customer pulled a delivery date forward, or a new project kicked off earlier than anyone planned. You don't have weeks to compare twenty vendors. You have days.
Here's the sequence I run. Seven steps. The order matters. Each one has a checkpoint; don't move to the next step until it's cleared.
Step 1: Lock the actual requirement before you request quotes
Close the browser tab. Before you email anyone, write down three things: the material, the maximum thickness, and the expected cutting hours per day.
I watched a client almost sign on a 100A machine back in November 2024 — fine on carbon steel, but their material list included 25mm 316 stainless. We caught the mismatch after the second quote round, and the reschedule added three days. That's three days I have to explain in a status meeting.
So list every material type, the thickness range, and the daily run time. Then send those numbers — not a vague description — to each supplier.
Step 2: Verify power and facility match
This is the step most buyers skip, and it's the one that turns a clean install into a two-week delay.
A typical 100A industrial plasma power source at 60% duty cycle pulls roughly 25–35 kVA from a 480V three-phase line. If the customer only has 208V three-phase, you either need a transformer or a different power source configuration. Either one adds lead time.
Fix: have the customer's electrical contractor sign off before any quote leaves your desk. In 2023 we almost shipped a unit that later turned out to need a transformer upgrade — the electrician caught it on the day before installation. Since then it's been a rule, not a suggestion.
Step 3: Check the manufacturer, not just the quote
Here's the counter-intuitive part. Most buyers compare three or four quotes and go with the lowest number. But as of January 2025, a fair share of cheap CNC plasma options come from small assembly shops with good beds but weak service networks.
What you're actually comparing is serviceability. Keep three checkpoints:
- A regional service partner, with a named contact, listed in the quote.
- A consumable parts list by part number, with lead times quoted from order confirmation.
- A factory acceptance test (FAT) record available if you provide material.
If a manufacturer won't offer any of those, it won't magically become reliable after payment clears.
Step 4: Compare total cost, not the sticker price
When I compared three quotes side by side — same ballpark list price, but consumables priced 4x apart between the cheapest and most expensive — I finally understood why the headline number is misleading. The base price is just the entry ticket.
Add these to every quote before you rank them:
- Installation (wiring, grounding, rigging the machine into place)
- First-year consumables (electrodes, nozzles, shield caps — usually replaced every 4–8 weeks on a 100A unit running two shifts)
- Operator training (if you don't have a trained CNC operator in-house)
- CNC controller and software licensing (a common line item that rarely shows up until late)
As of January 2025, entry-level industrial CNC plasma systems typically land in the $25,000–$75,000 range depending on table size, power source, and automation level. Confirm current pricing directly with each vendor — these numbers move with steel and freight costs.
Step 5: Write delivery terms into the contract
I still kick myself for the one that got away in 2022. We'd agreed to a 3-week delivery by email. The contract said 4 weeks. The machine arrived at week 4. We were fined $5,200 by the customer for the missed install, and every email thread in the file was worth exactly nothing.
The fix: any delivery commitment lives in the contract itself, with a penalty clause. Typical: 1–2% of contract value per day of delay. Suppliers push back on this about a third of the time, and they usually concede once they realize you're serious.
Step 6: Require a recorded trial cut
A machine that arrives doesn't mean it cuts. Before shipment, ask the supplier for a video-recorded trial cut using a material sample you provide. Yes — the video needs to show both the cutting and the inspection.
Do the trial cut on both ends of the thickness range, not just the middle. A plasma machine can be excellent at 12mm carbon steel and produce rough edges at 1.5mm sheet. Don't assume; test across the range you'll actually run.
Step 7: Confirm spare parts and warranty enforcement
Final checkpoint, and the one that gets skipped most often. Three items:
- A consumable list with part numbers and quoted lead times for each.
- Warranty start date confirmed in writing as the date of acceptance, not the date of shipment.
- A named warranty contact — not a general phone tree.
There's something satisfying about a rush order that lands clean — on time, on spec, and with every number where the paperwork said it would be. It happens far more often when all seven checkpoints are cleared.
Common mistakes (and how to avoid them)
It's tempting to think of the table size as the main spec. But a 30mm capacity machine is dramatically cheaper than a 100mm capacity machine for good reason — sheet size and cut thickness matter in completely different ways. Don't let table dimensions outrank cut capacity on your scoring rubric.
Watch for the difference between maximum cutting capacity and recommended cutting capacity. Maximum means "it will fire and produce a cut." Recommended means "it will cut continuously without destroying consumables." Always request the recommended figure in writing — it's the one that shows up in your real operating cost.
Don't ignore the amperage difference on stainless. Stainless typically needs more power than carbon steel at the same thickness. If your workload is mostly stainless, price the power source accordingly, not the carbon-steel spec.
And one more (note to self: paste this into the standard RFP template next quarter): never accept "equivalent" substitutions on parts unless the part number also matches. The part number is the only thing that survives a vendor change.
Don't skip the FAT record. In early 2024 a supplier tried to ship a unit without a verified trial cut at 60A. We held the unit for two weeks and rebooked the shipment once the record came through. Two weeks lost, but a warranty claim avoided — worth the trade every time.